The wireless nature of some security systems, merged with the lower power draw of few current’s ultra-modern cameras, makes CCTV a best application for wind or solar power.
Stand-alone cctv solar power system indicates that the complete system can be installed with no running power as well as data cables, both of that can be very expensive over a wide area.
An added advantage is the sovereignty of the power supply. Also when the nationwide grid goes down or there is a problem of power cut, a separate domestic solar power systems and CCTV system will continue to work in an efficient manner.
The Advantages Of Efficiency
If comes to modern IP cameras or network then these are best for use with a solar power system because of their high ability and efficiency to send the pictures off-site through a wireless data signal. These types of camera systems can utilize as some as 3 watts.
Most of the remote CCTV camera systems are in nonstop operation, thus it is crucial to remove power hungry equipment like digital image storage drives or heated camera housings.
If required, we strongly suggested purchasing an "extreme" camera housing that are really well insulated, that they would let the camera to work in temperatures as lower as the temperature of -50 deg C, with no any extra heating.
Utilization of a DC to AC convertor to exchange the battery power (DC) to major (AC) is not suggested, because of the inefficiencies supplementary to the system. A huge variety of high competence 12v or 24v dc camera systems are available on the market. You can go online and search solar powered cctv to get the best one for your needs.
Generally, it will confirm more reasonable to change an old type of security camera system with a latest one, just as of the latest reduced power requirement of equipment. Latest technology cameras utilize UV LEDs for the purpose of night filming that are a lot more efficient compare to other techniques.
Customized Kits of Solar Powered CCTV
When you will search online, you will find best off grid power solutions, they can design & supply modified wind or solar power systems for your exact residential solar lighting system and CCTV application. They even provide 'plug & play' kits, with pre-wired boards and modified cable sets. Their completely tested plug & play systems are very simple to use, saving lots of time of your installation engineers.
Because of the critical nature of some cctv solar power system, they recommend that you set up the normal power draw of your decided CCTV equipment, and after that pass information of your needs to their team that will be pleased to design & cost an appropriate power system for you.
Once contacting with them, you should include information like site location, daily needed watt hours and the voltage supply of the camera. You can check the information section of their site for complete guidance on how to set up your daily energy requirements.
No comments:
Post a Comment